|
Products
ROD HOLDERS AND MOUNTING OPTIONS
ROD HOLDERS
The positive locking head of the Cisco Fishing Systems rod holder will adjust to any angle from zero up to 90 degrees by actuating the padded lever. The rod holder simply indexes in a radial movement every 18 degrees by lifting and turning the spring-loaded mechanism. These features offer the fisherman a multitude of possibilities for positioning their rods.
The standard centerline spacing of the tubes is 8 ¼", which is wider than our competitor's. This spacing is crucial to prevent the reels from colliding into each other. It also prevents the reel from catching the neighboring reel when removing the rod. The inside diameter of each aluminum tube is 1 5/8". The wall of the tube is 3/16" thick creating the most rigid tube on the market.
They are available as single, double, triple and quad units  
Single and Double Rod Holder with Thumbscrew Mount Base
Single P/N RRH01TS-BK Double P/N RRH02TS-BE
Triple Rod Holder with Thumbscrew Mount Base P/N RRH03TS- SR
Triple Rod Holder with Gimbal Mount P/N RRH03GM-SR
Quad Rod Holder with Thumbscrew Mount Base P/N RRH04TS-GD
ROD HOLDER MOUNTS
Cisco Fishing Systems offers multiple types of mounting systems to accommodate most boats.
Thumbscrew Mount The base plate of this mount is permanently fastened to the gunwale. The thumbscrews pass thru the rod holder unit and into the base plate. A set of two thumbscrews fasten on a single rod holder, while four thumbscrews fasten multiple rod holders to the base plate. This allows for removal and storage of the rod holder.
Track Mount The track mount fits most of our competitor's tracks except 3" wide by 1/4" thick track plates, therefore our customer's do not have to replace their existing track system unnecessarily. (Track not included with the mount, but may be purchased separately.)
Rail Mount The rail mount system attaches to any standard 7/8" diameter boat handrails.
Single Rod Holder with Rail Mount P/N RRH01RM-SR
Gimbal Mount The Gimbal Mounts' ball and socket design will adjust up to 30 degrees in any direction. The distal end of the Gimbal pole has a unique locking system. The ball and socket design and the locking system are exclusive to Cisco Fishing Systems, Ltd.
 
Quick Release Mount This mount uses machined channels, a spring loaded plunger and a solid stop to ensure that no rods or holders fall overboard. There are no loose pieces to misplace with this mount.
Tube Colors At no additional charge, our tubes are available in five striking colors: Bright Silver, Bright Gold, Bright Blue, Bright Green and Bright Black
Custom Work Cisco Fishing Systems, Ltd. also offers custom work done to the customer's specifications.
STORAGE RACKS
Cisco Fishing Systems Storage Units allow our customers protection of expensive rods and organization of their boat deck.
Stationary Storage Racks Storage units are available with six, eight, ten and twelve tubes using a ¼" thick aluminum base flexible enough to mount on most hard tops. The tubes remove easily from the base which is great for winter wrapping of the boat!
Eight Unit Storage Rack with Silver Tubes and Stationary Mount
P/N RSR08SN-SR
Eight Unit Storage Rack with Gold Tubes and Stationary Mount
P/N RSR08SN-GD
Retractable/ Moveable Storage Racks Our Retractable/Moveable Storage Racks is designed to be mounted on hard tops. This rack allows easy access to load and unload fishing rods and to change the height to navigate low clearances. This rack can be operated easily with one hand.
Six Unit Storage Rack with Blue Tubes and Moveable Mount
P/N RSR06MV-BE
PLANER BOARD MAST & ACCESSORIES
Planer Board Mast with Electric Drive Includes one or two of the following items: 6” solid aluminum reel, line guide, variable clutch, aluminum clutch knob, high torque electric motor (modified output shaft), 1-1/2" diameter solid aluminum mast, aluminum cased pulley, removable base, mounting and backing plates.
Custom mast heights available: call for price and delivery.
Dual Reel Planer Mast (5 ft.) P/N RPM02ER-CR
Planer Board Electric Drive for Custom Applications Includes: 6" solid aluminun reel, line guide, variable clutch, aluminum clutch knob, high torque electric motor with modified output shaft, universal mounting bracket, vee clamp (capable of clamping 7/8" thru 1-1/2" diameter; larger vee clamps are also available).
FEATURES: electric drive motor, line guide and vee clamp may be rotated to other positions to accomodate your mounting requirements. The vee clamp can also be located on the same side which the motor is mounted, as long as the motor is rotated for their clearance.
 
Electric Drive for Planer Board Retrieval P/N RPM00ER-CR
Planer Board Manual Drive for Custom Applications Includes: 6” solid aluminum reel, line guide, variable brake, aluminum hand crank and clutch knob, universal mounting bracket, vee clamp (capable of clamping 7/8” thru 1-1/2” diameter; larger vee clamps are also available).
FEATURES: line guide and vee clamp may be rotated to other positions to accomodate your mounting requirements. The vee clamp can also be located on either side of the mounting plate.
 
Manual Drive for Planer Board Retrieval P/N RPM00HR-CR
|
